Contact Us Price List Final Check Out Reviews See It Burning! Back Home

Products Directions Shop

Website last updated January 12, 2004

visitors since Jan. 1, 2000.

Home

Off-Road Cowboy?

The top of the unit gets VERY HOT, but the base works as a buffer to protect what is beneath.
ALWAYS place EZ-CAMPFIRE Deluxe on its carrying case.

Figure 1   Figure 2
Figure 1   Figure 2
  1. Remove the EZ-CAMPFIRE Deluxe from the holding/carrying case. (See Figure 1)
  2. Place the EZ-CAMPFIRE Deluxe on top of the solid side of the carrying case. (See Figure 2)
  3. Uncoil the hose from the center/storage area of the EZ-CAMPFIRE. Thread the valve side "Brass Male fitting with Threads" of the hose to your propane fuel source. Connect the other end of the hose with the "Quick Connect Female" end to the "Quick Connect Male" end.
  4. Turn the propane bottle valve on with the EZ-Campfire regulator turned off. Light your match and place the flame or spark over a gas hole. Turn the EZ-Campfire gasd valve on low. When the EZ-CAMPFIRE ignites. If it does not stay lit, repeat.
  5. ENJOY!
  6. When you are done, turn the gas valve off on the propane source.
  7. IMPORTANT! Let the EZ-CAMPFIRE Deluxe cool at least 30 minutes before coiling the hose and replacing it in the center/storage area of the unit.
TROUBLESHOOTING

If it does not light, please check these common problems.

  1. You must have propane in the tank you are using.
  2. The valve on the fuel source is on.
  3. The gas valve is on low, medium or high.
  4. The "Quick Connect" fitting is securely fitted together. You must not be able to pull it apart. Pulling back the jacket on the female side os the fitting is the only way to unhook this fitting. Gas will not pass through if the connection is not together properly.